How To Charge A Fitpro Smart Watch? 6 Easy Steps

A fitness tracker or smartwatch could help you to begin or further your fitness journey. It can log activities such as your steps and distances travelled, provide motivational prompts to stop you flagging, and help you stay on track to meet targets.

If you’re new to the world of wearable technology, you may be wondering where to begin with your shiny new device. That’s where we can help.

Follow the process in this guide for a seamless and stress-free setup > you’ll be ready to go in no time.

FitPro Watches are another kind of smart watch like the Fitbit. This article How will teach you how to charge a FitPro watch.

Steps :

Remove the top strap from the watch-face. This is the watch band that’s on the opposite side of the circular button that’s on the watch-face. It should reveal an extruding piece with two gold.
Insert the two gold pins into a USB port. The most common charging tool is a USB adapter, like the one that comes with most modern Android phones and The display should light up to indicate that it has been plugged in.

Connect the USB adapter to a power source (if you’re not using a laptop/computer USB port). The USB adapter shouldn’t have power running through it if it isn’t connected, so plug it in to a wall port. Only plugged in to a charging USB port will the watch display either a charging battery icon. If it’s not, remove the watch from the USB port and try inserting it the other

A completely dead FitPro watch should take about an hour to charge

SYSTEM AND HARDWARE REQUIREMENTS

ANDROID 2 OR ABOVE

IOS 0 OR ABOVE
SUPPORTS 0
HOW TO CHARGE YOUR FITPRO TONIC?

TO CHARGE THE BATTERY, RELEASE THE WATCH FROM THE BAND BY PUSHING THE TOP OF THE WATCH OUT OF THE BAND. THEN CONNECT THE USB PART OF THE WATCH DIRECTLY IN YOUR USB CHARGER.

HOW TO CONNECT THE FITPRO TONIC TO YOUR PHONE

PRESS THE FITPRO TONIC BUTTON FOR FEW SECONDS TO TURN IT
TURN ON THE PHONE’S

OPEN THE APP KOUNGA
IN THE MENU SELECT NO NAME /
CLICK SEAR TO FIND YOUR DEVICES

CHOOSE THE MAC NUMBER WHICH MATCHES YOUR FITPRO
ONCE BLUETOOTH MATCH REQUIREMENT APPEARS, CLICK MATCH TO

HOW IT WORKS?

AFTER SUCCESSFUL CONNECTION, THE FITPRO TONIC WILL AUTOMATICALLY SYNC THE TIME AND DATE FROM THE PHONE.

THE APP SYNCS ALL THE DATA FROM THE FITPRO TONIC SUCH AS PEDOMETER, SLEEP MONITOR, HEART RATE MONITOR AND BLOOD PRESSURE MONITOR.

PRESS THE MAIN FITPRO TONIC BUTTON TO SWITCH BETWEEN FUNCTIONS. TO TURN OFF THE FITPRO – TONIC, PRESS TURN OFF FUNCTION FOR OVER 3 SECONDS.

FITPRO TONIC FUNCTIONS

HOME PAGE: SHOWS TIME, DATE AND BATTERY LEVEL. IF PRESSED FOR OVER 3 SECONDS, THE SECOND MAIN SCREEN APPEARS SHOWING TIME, DATE AND STEPS.

PEDOMETER: COUNTS DAILY STEPS AND RESETS EVERY 24 HOURS IN THE FITPRO TONIC. CHECK HISTORY IN THE APP.

CALORIES: COUNTS CALORIES SPENT AND RESETS EVERY 24 HOURS IN THE FITPRO TONIC. CHECK HISTORY IN THE APP.

DISTANCE: COUNTS METERS COMPLETED AND RESETS EVERY 24 HOURS IN THE FITPRO TONIC. CHECK HISTORY IN THE APP.

HEART RATE MONITOR: SWITCH TO THE SCREEN OF HEART RATE MONITOR FOR AUTOMATIC TEST. DATA WILL BE SAVED IN THE APP.

BLOOD PRESSURE MONITOR: SWITCH TO THE SCREEN OF BLOOD PRESSURE MONITOR FOR AUTOMATIC TEST. DATA WILL BE SAVED IN THE APP.

SLEEP MONITOR: OPEN THE FUNCTION OF SLEEP DETECTION IN THE APP TO CHECK DAILY SLEEPING STATUS. DATA SAVED IN THE APP.

SEDENTARY REMINDER: THE FITPRO TONIC WILL VIBRATE ON EACH REMINDER. TURN ON THE SEDENTARY REMINDER

FUNCTION WITHIN THE BAND FUNCTION SETTING IN THE APP

DRINKING REMINDER: THE FITPRO TONIC WILL VIBRATE ON EACH REMINDER. TURN ON THE DRINKING REMINDER FUNCTION WITHIN THE BAND FUNCTION SETTING IN THE APP.

SMART ANTI-LOST: THE FITPRO TONIC WILL VIBRATE WHEN THE PHONE AND THE FITPRO TONIC ARE BEYOND THE BLUETOOTH DISTANCE. TURN ON THE SMART ANTI-LOST FUNCTION WITHIN THE BAND FUNCTION SETTING IN THE APP.

SMART ALARM: THE FITPRO TONIC WILL VIBRATE WHEN THE ALARM GOES OFF. ALARMS ARE SET IN THE APP.

MESSAGE NOTIFICATION: GET WHATSAPP, INCOMING CALLS, INSTAGRAM, TEXT MESSAGES AND OTHER NOTIFICATIONS ON THE FITPRO TONIC BY TUNRNING ON THIS FUNCTION IN THE APP.

SHAKE FOR SELFIE: SHAKE FITPRO TONIC TO TAKE A PHOTO. CLICK THE SHAKE FOR SELFIE FUNCTION WITHIN THE BAND FUNCTION SETTING IN THE APP.

SEARCH DEVICE: THE DEVICE WILL RING WHEN THE SEARCH DEVICE FUNCTION WITHIN THE BAND FUNCTION SETTING IN THE APP IS USED.

Conclusion :

This watch does not provide or ensure accurate medical information related to heart, heart rate oxygen and blood pressure. must not be used as a substitute for medical advice, diagnosis or treatment. KOUNGA ltd reserves the right to make changes to the specification without notice.

FAQ ( People Also Ask ) :

Q. How do I know if my FitPro is charging?

Ans- Only plugged in to a charging USB port will the watch display either a charging battery icon.

If it’s not, remove the watch from the USB port and try inserting it the other direction. A completely dead FitPro watch should take about an hour to charge.

Q. How do I charge my smart watch?

Ans- Place your smartwatch directly on the charger. The magnetic charger has two pins that align with circular grooves in the caseback.

Make sure your watch is charging by looking for a lightning bolt at the top of the watch face, or by swiping down to see a lightning bolt next to your battery percentage.

Q. How long do you charge a Fit-Pro watch?

Ans- It usually takes 3-5 hours to fully charge the battery, lasts 3-5 days of use.

Q. Can I charge my smartwatch with my phone charger?

Ans- You can use any recent USB “charger” for any USB device. Some chargers will charge some devices faster.

Q. How do you charge a smart watch with a charger?

Ans- Please use the wireless charger that was included in the smartwatch packaging. Place your smartwatch directly on the wireless charger and a lightning bolt will appear on the watch face to denote that it is charging.

Q. Why can’t the APP search my band?

1. Make sure the band is charged and on, and the Bluetooth feature in the device is turned on.

2. Check if the phone is connected to another Bluetooth 4.0 device, unpair it first and try again.
3. Exit the APP from the background, open it again, and enter the search device interface to search the device again.
4. Other aspects to consider: Check whether the Bluetooth icon of the band has shown the connection. Also go to “Setting”– “Bluetooth Setting” to view the Bluetooth connection record. Please note that a band can only be connected to one phone. If the band is connected to other devices around it will not work.
5. If still doesn’t work, unpair the band with the device and pair it again.

Q. Why can’t my band push phone calls and messages?

1. When installing APP, you need to select the trust option, agree to the band for contact information, etc. Then select the messages notifications in the
app you prefer to receive in the band.
2. Make sure the APP and the band are connected. Turn on the push switch within the APP message “Alert function”.
3. Only messages that the phone can push will be transmitted onto the band, check if the phone has enabled the function of pushing notification.

Q. Why isn’t a contact name in the call reminder of my band?

1. When a call reminder is pushed to the band, the details saved in the device will be pushed to the band. Where there isn’t a name, only the phone number will be displayed.
2.Device should have been granted for the APP to access contact, information, call record, etc. Heart rate and blood pressure test results are inaccurate?
3.These functions are indicative only and are not 100% accurate. You should not use this for medical purposes.
4.It is suggested to wear the band correctly when measuring. The band should be worn on the wrist, close to the skin, keep still, and keep the arm as high as the heart for measurement.

Q. How to monitor sleep and when to see synchronized sleep data?

1.Band test sleep time is between 22: 00–08: 00. Upload data after 08:00 the next day.
2.To monitor sleep, you need to wear a band to sleep, and detailed sleep data will be synchronized to the APP after 08:00 the next day.
3.If it is not synchronized in time, click the synchronization button in APP for manual synchronization.

Q. Why is the connection is unstable?

Some mobile phones will clean up background programs from time to time in order to clean up their memory and optimize their power consumption. At this point, the APP will be cleaned up, it is recommended that users add APP to the phone’s whitelist or self-boot management.

And read about Apple Watch Series 7 in our Best Guide.